Wi-Fi Network Setup
1. Wi-Fi Pairing Button Reference Table
| No. | Display Model | Wi-Fi Pairing Instructions | Matching QR Code |
|---|---|---|---|
| I | TY10368 | While powered off, press and hold the Mode button for 3 seconds until the Wi-Fi icon flashes. | Fig. 1 |
| II | HC-114B | While powered off, press and hold the Mode button for 3 seconds until the Wi-Fi icon flashes. | Fig. 1 |
| III | WL5080 | While powered on, press and hold the Reset button for 3 seconds until the Wi-Fi icon flashes. | Fig. 1 |
| IV | CH01/03 | While powered off, press and hold the Mode button for 3 seconds until the Wi-Fi icon flashes. | Fig. 1 |
| V | DB106 | While powered off, press and hold the Mode button for 3 seconds until the Wi-Fi icon flashes. | Fig. 1 |
| VI | F3 | No Wi-Fi pairing function. | — |
| VII | WP23 | While powered off, press and hold the Settings button for 5 seconds until the Wi-Fi icon flashes. | Fig. 2 |
| VIII | WP44 | While powered on, press and hold the Settings button for 5 seconds until the Wi-Fi icon flashes. | Fig. 2 |
| IX | F4 | While powered off, press and hold the Power button for 3 seconds until the heating icon flashes. | Fig. 2 |
| X | WP33 | While powered off, press and hold the Settings button for 10 seconds until the Wi-Fi icon flashes. | Fig. 2 |
2. Wi-Fi Pairing Button Instructions
1. Scan the QR code with WeChat on your smartphone to download and install the app.
2. Register or log in to the app.
3. Connect your smartphone to Wi-Fi and enable location services and Bluetooth.
4. In the app, tap “Add Device” and ensure your phone is connected to the same Wi-Fi network.
5. Press and hold the designated button on the wall-mounted boiler display as specified in the “Wi-Fi Pairing Button Reference Table 1” until you hear a “beep” sound, or until the heating icon
or Wi-Fi icon begins flashing.
6. In the app’s settings interface, tap the + icon or select “Add Device”.
7. On the Add Device screen, enter the Wi-Fi network name (SSID) and password currently used by your smartphone.
8. After tapping Next in the app’s Add Device flow and confirming the Wi-Fi password, the Wi-Fi icon on the display will flash (indicating it is searching for and connecting to the network). Once the Wi-Fi icon remains steadily lit, communication between the mobile app and display has been successfully established, and the app will automatically navigate to the device control interface.